Inabia Software & Consulting Inc.

Mechatronics Test Engineer - Robotics Hardware Verification and Validation

North Reading, MA - Full Time

Mechatronics Test Engineer - Robotics Hardware Verification & Validation

Employer: Inabia Solutions & Consulting Inc.
Location: North Reading, MA
Employment type: W-2 contract
Work Location: Onsite 5-days per week

Position Overview

Inabia Solutions & Consulting Inc. is seeking a Mechatronics Test Engineer to support a client developing next-generation robotics and automation systems. You will develop and execute verification and validation programs for robotic subsystems and complete systems. This hands-on role includes designing test methods and fixtures, commissioning test benches, selecting instrumentation, conducting functional and reliability testing, and turning measurement data into engineering findings that guide design decisions. Candidates with relevant experience in robotics, complex automation, automotive, or aerospace systems are encouraged to apply.

Responsibilities

  • Develop functional specifications, design verification plans, test strategies, procedures, and acceptance criteria for complex hardware/software systems.
  • Translate engineering requirements into measurable tests, maintaining traceability between requirements, test results, and verification conclusions.
  • Design, commission, and operate test benches and fixtures for actuators, sensors, batteries, power systems, electronics, and robotic manipulation systems.
  • Perform characterization and functional testing of mechatronics components, subsystems, and integrated robotic systems.
  • Develop and execute hardware reliability programs using applicable methods such as Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), Accelerated Life Testing (ALT), and reliability growth testing.
  • Select test equipment and instrumentation based on measurement needs, operating ranges, accuracy, and program development stage.
  • Collect, process, and analyze test data to determine performance metrics, identify failure modes, and assess compliance with specifications.
  • Investigate test failures with mechanical, electrical, software, and controls engineers; verify corrective actions through follow-up testing.
  • Create test reports documenting methods, results, deviations, and recommendations for design improvement.
  • Develop practical test approaches when requirements are incomplete or changing.
  • Coordinate equipment, suppliers, schedules, and test activities to support product development milestones.

Required Qualifications

  • Bachelor’s degree in mechanical engineering, Electrical Engineering, Computer Engineering, or a related technical discipline.
  • Strong verification and validation experience with robotics or complex automation systems. Relevant automotive or aerospace experience is also acceptable.
  • Experience developing test methods, verification plans, and/or test fixtures.
  • Hands-on experience characterizing and functionally testing mechatronics hardware.
  • Experience developing hardware reliability tests using HALT, HASS, ALT, and/or reliability growth methods.
  • Experience verifying requirements for relevant hardware, including actuators, sensors, batteries, power systems, electronics, or robotic manipulation systems.
  • Experience setting up and operating test benches, instrumentation, and data collection equipment.
  • Ability to analyze measurement data and communicate findings through clear engineering reports.
  • Experience collaborating across mechanical, electrical, software, and controls disciplines.
  • Ability to work onsite in North Reading, MA.
Preferred Qualifications
  • Master’s degree in electrical engineering, Computer Engineering, Mechanical Engineering, or an equivalent technical field.
  • Experience supporting product development from concept through production.
  • Experience selecting, sourcing, and setting up third-party lab equipment.
  • Experience managing technical test projects and coordinating suppliers.
  • Programming or test automation experience using Python, C++, MATLAB/Simulink, LabVIEW, or similar tools.
Apply: Mechatronics Test Engineer - Robotics Hardware Verification and Validation
* Required fields
First name*
Last name*
Email address*
Phone number*
Resume*

Attach resume or Paste resume

Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or paste resume

Paste your resume here or attach resume file

This role requires a 5-day onsite presence in either our Wilmington, North Reading or Woburn locations. Will this be a problem?*
What is your current work authorization?*
How many years experience do you have as a Mechatronics Test Engineer?*
Do you have experience developing and executing hardware reliability programs using applicable methods such as Highly Accelerated Life Testing (HALT), Highly Accelerated Stress Screening (HASS), Accelerated Life Testing (ALT), and reliability growth testing.*
The following questions are entirely optional.
To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.
Gender
Race/Ethnicity
Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status
I IDENTIFY AS ONE OR MORE OF THE CLASSIFICATIONS OF PROTECTED VETERAN LISTED ABOVE
I AM NOT A PROTECTED VETERAN
I DON’T WISH TO ANSWER
Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 07/31/2029
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:
YES, I HAVE A DISABILITY, OR HAVE HAD ONE IN THE PAST
NO, I DO NOT HAVE A DISABILITY AND HAVE NOT HAD ONE IN THE PAST
I DO NOT WANT TO ANSWER

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Name Date
Human Check*